0 items

Secure Checkout
To Join MFJ Email List Click Here!
All CategoriesKITSMORSE CODEMETERSFILTERSTUNERSDUMMY LOAD

Product Search
Sister Companies

Site Menu

Ham Radio Videos






 Company News
Call Toll Free: 1-800-647-1800 or Call: 1-662-323-5869
300 Industrial Park Road, Starkville, MS 39759 Click to view Map!
DOWNLOAD Our FULL Product Catalog!
HRO Superfest 2019
Milwaukee, WI

Sept 28, 2019
COMPANY NEWS:
SITE NEWS:
At 9 am GMT everyday, we will be performing server reboots causing the systems to be down for approximately 10 to 15 minutes!
Click Here to Find a ARRL approved Ham License test near you!

** FEATURED PRODUCTS **
VEC-1290K
KIT, AM RADIO TRANSMITTER

$ 39.95 each

Broadcast Your Own Radio Show


If you ever dreamed of having your own radio station, here is your low cost opportunity. You can set up your own AM station and broadcast crystal clear programming from your studio with you as the disk jockey or talk show host. Play music from your CD player, tape deck or other source. You can choose any clear frequency in the AM broadcast band from 530 to 1750 KHz and broadcast interference free to your neighborhood. Your kit accepts a standard line level or microphone input so its easy to connect to CD players, tape decks or mike mixers. Has audio level adjustment. Has high level AM modulation for low distortion. An FCC license is not required.


Skill Level: Simple Calls for a few basic tools -- a soldering iron, cutters, pliers, wire-strippers and a small screwdriver. Doesnt require test equipment for final adjustment or tuning.


Note: This is merely the kit. If you would like to purchase a case for your electronic kit as well, you will need to purchase the VEC-1290KC separately.




VEC-102K
IT, SWL RECEIVER KIT


$ 99.95 each

World-wide stations come in loud and clear


Build this shortwave regenerative receiver kit and sit back and enjoy listening to the world. The VEC-102K covers all or part of 75/80, 49, 40, 30, 31, 20, 25, 22, 19, 17, 16, 15, and 13 Meter bands. It lets you listen to AM, SSB, CW, WWV, RTTY, and packet. The kit offers smooth vernier reduction drive, smooth regeneration control and RF stage.

The VEC-102K includes an all-metal cabinet. The ranges of the unit are as follows:

Range A:3.51 to 4.31 MHz
Range B:5.95 to 7.40 MHz
Range C:9.56 to 12.05 MHz
Range D:13.21 to 16.4 MHz
Range E:17.6 to 22 MHz


The kit includes two jacks for earphones or speakers and all metal cabinet. It requires a 9 Volt battery (not included). The kit measures 7 x 6 x 2 inches.

Skill Level: Intermediate Requires more involved construction. You may use some test gear for final adjustment or tuning.





VEC-1444K
KIT, 440 MHZ, PRE-AMP


$ 24.95 each

Low-Noise Amplifier


Soup-up your antenna system and "pull the weak ones" with this easy-to-build LNA (low noise amplifier). Heres a high -gain, low-noise preamp that will work wonders for your scanner or ham-band receiver. Unlike low-cost GaAsFET preamps, Vectronics kits use a high quality microwave type bipolar device for exceptional low-noise performance and immunity from damaging electrostatic discharge. A high-Q LC tuned input filter fights overload from out-of-band signals, and careful output matching ensures efficient energy transfer into your 50-Ohm feedline. Will cover near-by out-of-band commercial channels with only minor retuning.


Skill Level: Simple Calls for a few basic tools -- a soldering iron, cutters, pliers, wire-strippers and a small screwdriver. Doesnt require test equipment for final adjustment or tuning.

Note: This is merely the kit. If you would like to purchase a case for your electronic kit as well, you will need to purchase it separately.



VEC-131K
KIT, AIRCRAFT RECEIVER


$ 39.95 each
Tune in the Friendly Skies

This exciting project tunes the entire voice aircraft band, from 118 - 136 MHz, and picks up air traffic 100 miles or more away. Climb into the cockpit and fly "right seat" as pilots and air-traffic controllers work together to keep skies friendly and safe.

Track progress of incoming/outgoing traffic in your area and gain advanced weather information first-hand from pilot reports and discover how the National Air Traffic System really works. This is not only a "fun" electronic kit to build and operate, its also a great way to learn about radio/electronics and aviation at the same time! Uses 9 volt battery (not included), and drives a speaker or headphones. The kit measures 1 x 3 x 3 inches.

Skill Level: Intermediate Requires more involved construction, you may use some test gear for final adjustment or tuning.

Note: This is merely the kit. If you would like to purchase a case for your electronic kit as well, you will need to purchase the VEC-131KC separately.


DL-2500
IT, DUMMY LOAD, 2500W, 0-150MHZ, FAN COOLED


$ 259.95 each
Fan cooled DL-2500 Dummy Load simulates an accurate 50 Ohm antenna up to 60 MHz, enabling you to test your transmitter without radiating a signal on the air. 115 VAC to 12 VDC adaptor is included.

Specifications:

DC to 60 MHz.

Handles short-term RF power up to 2500 Watts.

VSWR of less than 1.3:1 at 30 MHz.

Power dissipation: 2500 Watts average up to one minute maximum.

Fan must be used at high power levels.

Duty Cycle: 10% with fan.

Voltage Gradient: 10 kV per inch.

Resistor type: Dispersed carbon particles fired in a ceramic matrix.

Energy Density: 7000 joules/inch/second.

Weight: 5 lbs.



HPF-2
HIGH PASS FILTER, DELUXE, TVI


$ 54.95 each
Suppresses the more severe TV interference at the source. Used between cable and VCR or TV set, the HPF-2 reduces TV interference (from nearby radio transmitters such as broadcast, commercial, two-way, amateur and CB operating below 30 MHz.

Unique common mode reject (RF current on the shield of the coax cable uses toroid ferrite core. Uses "F" connectors.


DL-650M
IT, DUMMY LOAD, 1500W, 0-650 MHZ


$ 89.95 each
The DL-650M Dummy Load simulates an accurate 50 Ohm antenna up to 650 MHz, enabling you to test your transmitter without radiating a signal on the air.

Specifications:

DC to 650 MHz.

Handles short-term RF power up to 1500 watts.


VEC-1402K
KIT, 2M PRE-AMP


$ 24.95 each

Low-Noise Amplifier


Soup-up your antenna system and pull the weak ones with this easy-to-build LNA (low noise amplifier). heres a high gain, low noise preamp that will work wonders for your scanner or ham-band receiver. Unlike low-cost GaAsFET preamps, Vectronics kits use a high quality microwave type bipolar device for exceptional low-noise performance and immunity from damaging electrostatic discharge. A high-Q LC tuned input filter fights overload from out-of-band signals, and careful output matching ensures efficient energy transfer into your 50-Ohm feedline. will cover near-by out-of-band commercial channels with only minor returning.


Skill Level: Simple Calls for a few basic tools -- a soldering iron, cutters, pliers, wire-strippers and a small screwdriver. Doesnt require test equipment for final adjustment or tuning.

Note: This is merely the kit. If you would like to purchase a case for your electronic kit as well, you will need to purchase it separately.



VEC-1290K
KIT, AM RADIO TRANSMITTER


$ 39.95 each

Broadcast Your Own Radio Show


If you ever dreamed of having your own radio station, here is your low cost opportunity. You can set up your own AM station and broadcast crystal clear programming from your studio with you as the disk jockey or talk show host. Play music from your CD player, tape deck or other source. You can choose any clear frequency in the AM broadcast band from 530 to 1750 KHz and broadcast interference free to your neighborhood. Your kit accepts a standard line level or microphone input so its easy to connect to CD players, tape decks or mike mixers. Has audio level adjustment. Has high level AM modulation for low distortion. An FCC license is not required.


Skill Level: Simple Calls for a few basic tools -- a soldering iron, cutters, pliers, wire-strippers and a small screwdriver. Doesnt require test equipment for final adjustment or tuning.


Note: This is merely the kit. If you would like to purchase a case for your electronic kit as well, you will need to purchase the VEC-1290KC separately.




VEC-221K
KIT, CW MEMORY KEYER


$ 79.95 each

128 Character Message Memory


The VEC-221K CW Memory Keyer Kit lets you store up to 512 characters in four 128 character non-volatile EEPROM message memories. You can carry on entire QSOs by just pressing message memory buttons. True Sinewave Sidetone? eliminates key clicks with 5 milliseconds of rise and fall time -- gives you the most pleasant sounding sidetone ever heard. The LM386 audio power amplifier provides extra loud volume to external speakers.


The kit also features self-completing dots and dashes with proper timing, dot-dash memory, front panel speed (3 to 60 wpm) and volume controls. You can adjust weight from 25% - 75% and sidetone pitch from 300 Hz - 1000 Hz. Select fully auto or semi-auto mode for "bug" style operation. Select Iambic mode A or B. The kit also has a tune mode for tuning your transmitter or antenna tuner. MOSFET direct keying output keys any transmitter with positive voltage to ground keying. Totally RF proof. The kit uses a 9 volt battery (not included). The kit requires a single/dual lever paddle. It measures 1 x 6 x 5 inches.


Skill Level: Simple Calls for a few basic tools -- a soldering iron, cutters, pliers, wire-strippers and a small screwdriver. Doesnt require test equipment for final adjustment or tuning.


Note: This is merely the kit. If you would like to purchase a case for your electronic kit as well, you will need to purchase the VEC-221KC separately.




DOWNLOAD
Your New MFJ 2019
Ham Radio Catalog

HERE!

148 Pages of MFJ, Ameritron, Hygain, Cushcraft, Mirage and Vectronics Products!

REQUEST PRINT CATALOG!


VEC-131KC
KIT CASE, AIRCRAFT RECEIVER


$ 17.95 each
VEC-131K Matching Kit Cabinet

All metal cabinet for Aircraft receiver VEC-131K; includes knobs, hardware and rubber feet. Brushed aluminum looking decal for front panel.

Turn your VETRONICS VEC-131K Aircraft Receiver kit into a fabulous show piece! Add our custom all metal cabinet and knob set to complete your kit!

You will get an attractive custom designed cabinet for your VEC-131K Aircraft Receiver Kit. It features a scratch-proof vinyl covered top and professional looking front and rear decals that look like nice, brushed aluminum.

This rugged all metal cabinet will give you years of enjoyment.

You get a complete cabinet kit that includes all assembly hardware, front and rear panel decals, and self adhesive rubber feet.

This cabinet is custom designed on Vectronic`s powerful CAD stations and directly downloaded into our world class computer controlled Amada turret punch presses. Each cabinet is precision bent and formed by Amada bending brakes.

Each Vetronic`s custom cabinet kit is made in the USA.


PM-30
HF WATTMETER, 300/3000W, 1.8-60 MHZ


$ 109.95 each
PM-30 can simultaneously measure and display forward power, reflected power and SWR in the frequency range on their dual movement meter system.

Accuracy of the readings is assured because these SWR/Power Meters feature a true shielded directional coupler.

The backlit meter can also display either peak or average power readings. Optional 12 VDC adaptor.

First rate construction includes scratch proof Lexan front panel.

SO-239 Connectors.





$ each





$ each






VEC-1402K
KIT, 2M PRE-AMP
$24.95 each



VEC-1444K
KIT, 440 MHZ, PRE-AMP
$24.95 each



VEC-131KC
KIT CASE, AIRCRAFT RECEIVER
$17.95 each



VEC-131K
KIT, AIRCRAFT RECEIVER
$39.95 each




All information, images, and documents on this website are the sole property of Vectronics Any reuse or redistribution of the contents of this website are strictly forbidden without authorization from Vectronics
LMR is a Registered Trademark of Times Microwave Systems!
Raspberry Pi is a Registered Trademark of Raspberry Pi!